Cryomagnet 239OXHV21

8T horizontal — Dual-exchanger VTI (alias Blue Charly)

Type	ILL VTI
Tmin	1.5K
Tmax	300K
Instrument	Pool

Sensor Regul.	Cernox CX1050
Serial number	X85861
Calibration	ILL #2013-2
Interpol. Table	Download (LK336) (txt - 5.65 Ki) Download (LK340) (txt - 5.64 Ki)

Sensor Samp.	Cernox CX1050
Serial number	X98509
Calibration	ILL #2017-5
Interpol. Table	Download (LK336) (txt - 5.65 Ki) Download (LK340) (txt - 5.64 Ki)

Sensor Samp. #2	Cernox CX1050
Serial number	X121623
Calibration	ILL #2017-6
Interpol. Table	Download (LK336) (txt - 5.57 Ki) Download (LK340) (txt - 5.56 Ki)

IPS-120 Test 07 superconducting magnet parameters (Test 06 magnet system configuration set to 1)

S01	Amps/Tesla conversion	97.094 A -> 8 T
S02	Power supply current limit	109.230 A
S03	Lower (most negative) safe current	-150.0 A
S04	Upper (most positive) safe current	149.99 A
S05	Current breakpoints for rate limiting	b01: 60 A b02: 85 A b03: 97.094 A
S06	Limiting rate for leads, magnet at zero	240 A/min everywhere
S07	Limiting rate for leads, magnet at field	240 A/min everywhere
S08	Limiting rate for magnet, "FASt" run	r01: 12.14 A/min between 0 and 60 A r02: 12.14 A/min between 60 and 85 A r03: 12.14 A/min between 85 and 97.094 A
S09	Limiting rate for magnet, "SLO " (slow) run	r01: 5 A/min between 0 and 60 A r02: 2 A/min between 60 and 85 A r03: 1 A/min between 85 and 97.094 A
S10	Software voltage limit	10.00 V
S11	Magnet inductance	26.2 Henry according to Oxford Instruments
S15	Switch heater current	65 mA

8T-Blue Charly-OE54-0mm-15deg

8T-Blue Charly-OE54-10mm-13deg

8T-Blue Charly-OE54-20mm-10deg

8T-Blue Charly-OE40-0mm-8deg

8T-Blue Charly-OE40-10mm-6deg

8T-Blue Charly-OE40-20mm-4deg