Cryomagnet 158OXHV26

15T vertical symmetric

The magnetic field homogeneity is 0.5% in a Ø10mm sphere centered on the beam axis. The beam opening is Ø20mm. The standard sample stick can be inserted so that its extremity reaches the beam height.

Type	ILL VTI
Tmin	1.5K
Tmax	300K
Instrument	Pool

Sensor Regul.	Cernox CX1050
Serial number	X48398
Calibration	ILL 2009-1
Interpol. Table	Download

Sensor Samp.	Cernox CX1050
Serial number	X48399
Calibration	ILL 2009-1
Interpol. Table	Download

Sensor Magnet	-
Serial number	-
Calibration	-
Interpol. Table	-

IPS-120 Test 07 superconducting magnet parameters (Test 06 magnet system configuration set to 1)

ATTENTION ! The maximum current set in the power supply corresponds to 15 T. The maximum allowed field is 14.9 T and we cannot garantee greater fields. The maximum allowed field is 13.5 T when the temperature of the magnet is between 2.3 and 4.2 K. Users MUST check that the temperature of the magnet is below 2.3 K before requiring fields above 13.5 T.

S01	Amps/Tesla conversion	115.336 A/T
S02	Power supply current limit	115.336 A
S03	Lower (most negative) safe current	-150.0 A
S04	Upper (most positive) safe current	149.99 A
S05	Current breakpoints for rate limiting	b01: 80 A b02: 95 A b03: 103.802 A i.e. 13.5 T b04: 108 A b05: 115.336 A i.e. 15 T
S06	Limiting rate for leads, magnet at zero	240 A/min everywhere
S07	Limiting rate for leads, magnet at field	240 A/min everywhere
S08	Limiting rate for magnet, "FASt" run	r01: 1.5 A/min between 0 and 80 A r02: 1.0 A/min between 80 and 95 A r03: 0.3 A/min between 95 and 103.802 A r04: 0.3 A/min between 103.802 and 108 A r05: 0.2 A/min between 108 and 114.567 A
S09	Limiting rate for magnet, "SLO " (slow) run	r01: 1.5 A/min between 0 and 80 A r02: 1.0 A/min between 80 and 95 A r03: 0.3 A/min between 95 and 103.802 A r04: 0.3 A/min between 103.802 and 108 A r05: 0.2 A/min between 108 and 114.567 A
S10	Software voltage limit	12.49 V
S11	Magnet inductance	194.1 Henry according to Oxford Instruments
S15	Switch heater current	68 mA