Cryomagnet 139OXHV40

10T vertical asymmetric dedicated to D3 - stick #2 is for TU experiments

IPS-120 Test 07 superconducting magnet parameters (Test 06 magnet system configuration set to 1)

S01	Amps/Tesla conversion	121.481 A -> 10 T
S02	Power supply current limit	121.481 A
S03	Lower (most negative) safe current	-156.25 A
S04	Upper (most positive) safe current	156.25 A
S05	Current breakpoints for rate limiting	b01: 45 A b02: 100 A b03: 110 A b04: 121.481 A
S06	Limiting rate for leads, magnet at zero	240 A/min everywhere
S07	Limiting rate for leads, magnet at field	240 A/min everywhere
S08	Limiting rate for magnet, "FASt" run	r01: 5.5 A/min between 0 and 45 A r02: 4 A/min between 45 and 100 A r03: 2 A/min between 100 and 110 A r04: 0.5 A/min between 110 and 121.481 A
S09	Limiting rate for magnet, "SLO " (slow) run	r01: 5.5 A/min between 0 and 45 A r02: 4 A/min between 45 and 100 A r03: 2 A/min between 100 and 110 A r04: 0.5 A/min between 110 and 121.481 A
S10	Software voltage limit	12.49 V
S11	Magnet inductance	84.2 Henry according to Oxford Instruments
S15	Switch heater current	70 mA