Cryomagnet 283HTHV39
12T vertical asymmetric
| Type | High-Tc magnet |
|---|---|
| Tmin | 1.5K |
| Tmax | 300K |
| Instrument | Pool |
Sensor Regul. | Cernox CX1050 |
|---|---|
Serial number | X177564 |
Calibration | ILL #2024-1 |
Interpol. Table |
Sensor Samp. #1 | Cernox CX1050 |
|---|---|
Serial number | X177565 |
Calibration | ILL #2024-1 |
Interpol. Table |
The magnet is protected by a magnet monitor which continuously checks that operating voltages and temperatures do not exceed set limits. This monitor will not allow the power supply to operate until temperatures and voltages fall below the Enable limits. After that, if voltages or temperatures rise above the Disable limits, the monitor sends a disable signal to the power supply and the operating current drops to zero to protect the magnet.
| Amps/Tesla conversion | 18,347 A/T | |
|---|---|---|
| Power supply current limits | -221 A | +221 A |
| Stage 1 cooler temperature limits (T1) | Enable if < 43 K | Disable if > 45 K |
| Stage 2 cooler temperature limits (T2) | Enable if < 11 K | Disable if > 12 K |
| Coil pack A temperature limits (T3) | Enable if < 13 K | Disable if > 15 K |
| Coil pack B temperature limits (T4) | Enable if < 13 K | Disable if > 15 K |
| Interconnection temperature limits (T5) | Enable if < 14 K | Disable if > 16.5 K |
| Coil differential voltage limits | Enable if < 2 mV | Disable if > 200 mV |
| Coil-pack A differential voltage limits | Enable if < 2 mV | Disable if > 2000 mV |
| Coil-pack B differential voltage limits | Enable if < 2 mV | Disable if > 4800 mV |
| Current lead differential voltage limits | Enable if < 2 mV | Disable if > 5 mV |
(svg - 841 Ki)
(svg - 843 Ki)