Recherche

7T vertical asymmetric - for reflectometry and SANS Type ILL VTI Tmin 1.5K Tmax 300K Instrument Pool Sensor Samp. #1 Cernox CX1050 Serial number X48391 Calibration ILL 2007-11 Interpol. Table download ... between 50 and 80 A r03: 1 A/min between 80 and 96.79 A S09 Limiting rate for magnet, "SLO " (slow) run r01: 3.5 A/min between 0 and 50 A r02: 2 ...

x 30 mm height sample, 1 mm Cd thick plates included. The 90° horizontal opening takes account of the 1 mm thick Cd plates fixed to the pillars of the magnet. Type ILL VTI Tmin 1.5K Tmax 300K Instrument ... Serial number X100798 Calibration LakeShore Interpol. Table Download (txt - 4.14 Ki) (svg - 1.31 Mi) (svg - 1.29 Mi) (svg - 336 Ki) (svg - 338 ...

This cell is made from the aluminium alloy 7049-T6. It has a Ø6 x 65 mm, i.e. 1.85 ml, sample volume and uses helium as the pressure medium. The pressure is generated using a standard gas compressor. For

This cell is made from TiZr alloy . It has a Ø6 x 65 mm, i.e. 1.85 ml, sample volume and uses helium as the pressure medium. The pressure is generated using a standard gas compressor. For powders, the

thin capsule made from aluminium alloy (AG3 i.e. EN AW-5754). The maximum pressure is 100 MPa, i.e. 1 kbar up to 100°C. As it is non-magnetic, it may be used on a polarised neutron instrument or inside

thin capsule made from aluminium alloy (AG3 i.e. EN AW-5754). The maximum pressure is 100 MPa, i.e. 1 kbar up to 100°C. As it is non-magnetic, it may be used on a polarised neutron instrument or inside

thin capsule made from aluminium alloy (AG3 i.e. EN AW-5754). The maximum pressure is 100 MPa, i.e. 1 kbar up to 300°C. As it is non-magnetic, it may be used on a polarised neutron instrument or inside

inserts producing a flat sample (1 or 2 mm thicknesses). These inserts are made from aluminium alloy EN AW-7049A-T6 and the sample volumes are respectively 10 x 47 x 1 and 47 x 10 x 2 mm3, i.e. 0.45 and ... in the beam Aluminium inserts making it possible to produce flat samples in the beam (1 and 2 mm thicknesses) (pdf - 1.39 Mi)

inserts producing a flat sample (1 or 2 mm thicknesses). These inserts are made from aluminium alloy EN AW-7049A-T6 and the sample volumes are respectively 10 x 47 x 1 and 47 x 10 x 2 mm3, i.e. 0.45 and ... maximum pressure is 250 MPa, i.e. 2.5 kbar up to 100°C. Sketch of the TiZr cell in the beam (pdf - 1.18 Mi) Drawing of the TiZr cell - Click on ...

inserts producing a flat sample (1 or 2 mm thicknesses). These inserts are made from aluminium alloy EN AW-7049A-T6 and the sample volumes are respectively 10 x 47 x 1 and 47 x 10 x 2 mm3, i.e. 0.45 and