Recherche

150 bar above the setpoint requested by the user. The Eurotherm controller opens the CNRS valve (VP1) to increase the pressure in the cell or press. It opens the CNRS valve (VP2) to decrease the pressure

rate 4963 Mode (0:Automatic; 1:Manual) 0 1 273 PID zone setting 1: Proportional 0 6 PID zone setting 1: Derivative 0 8 PID zone setting 1: Integral 0 9 PID zone setting 1->2 in hPa 0 200 153 PID zone setting ... Release History 1.00 - Initial release 1.01 - Added the management of the Auto/Manu modes. 1.02 - Added a page for displaying the firmware ...

tasks. We provide a few plugins which may help you perform neutron scattering experiments. ModBus XOP (v1.08 - March 2020) Command line operations described here are added to Igor Pro. Modbus adds no menu items ... instrument expects and what the Modbus operations do so that you can coordinate them. More NOMAD XOP (v1.01 - October 2009) NOMAD is an ...

History 1.00 - Initial release 1.01 - Modified the pages for simplifying the use of the controller. 1.02 - Fixed a bug where the alarm cannot be acknowledged until the high limit is reached. 1.03 - Added ... level set point in % 0 100 4963 Fill command 0 1 4976 Fill timeout value in min (default: 30min) 0 100 11272 Fill timeout error status 0 1 ...

0 100 4963 Fill command 0 1 4976 Fill timeout value in min (default: 30min) 0 100 11272 Fill timeout error status 0 1 11273 Auto-run-down status 0 1 10265 Firmware version 1 10 4977 Electrical and operating ... contact us. Release History 1.00 - Initial release 1.01 - Modified the pages for simplifying the use of the controller. 1.02 - Fixed an ...

zones (e.g. zones 1 and 2 for Ø49 Orange Cryostat and zones 3 and 4 for Ø100 Orange Cryostats). The LakeShore determines the zone to apply from the measured temperature, starting from zone 1. LakeShore 340 ... (called ILL-SEC) was able to regulate the temperature from two sensors covering overlapping ranges (1-50 K with the Carbon and 20-320 K with ...

most recent release of the firmware, please contact us Release History 1.00 - Initial release 1.01 - Added lead wire compensation 1.02 - Improved pages and safety at startup Instructions for updating the ... version 1.05 of the soft-wired program installed and preset with Orange cryostats parameters. Remote control is performed using the registers ...

ejected by excessive pressure in the sample well. Top of the 15T dilution refrigerator insert. (pdf - 1.01 Mi) Note Technique DPT #10 (PDF file - Acrobat 4.x) Safe removal of the insert BE CAREFUL! The phase

Static Steel: The presence of steel in close proximity to the magnet can cause two possible problems; 1) Excess force on the cryostat components leading to damage to the magnet support system or poor cryogenic ... be visible in experimental results. Objects such as vehicles or elevators should be well outside the 1 gauss contour. Large steel ...

generated using a hydraulic press, then locked in by an external locknut. The maximum pressure is 12 kbar (1.2 GPa) at room temperature. The real pressure applied on the sample depends on the volume and shape ... . As it is non-magnetic, it may be used on a spin-echo spectrometer or inside a cryomagnet. (pdf - 1.06 Mi)