Recherche

the fill timeout can easily be modified from the Settings menus according to the user wishes. Full remote control Computer control via RS-485 and Ethernet is available. All parameters can be read and set ... remotely control the level monitor. Operation The monitor manages the readings and the fills. The user can easily set the low and high levels, ...

0.27 Å-1 (reflection down) for horizontal samples, and an even broader q-range can be achieved for solid samples which can be tilted using one of the sample goniometers. The sample area includes an active ... antiviral medicines are currently used, there is no vaccination currently available and side effects can results in a wrong diagnosis. In the ...

at undergraduate level. Information about currently open placement opportunities and internships can be found in the Careers section.

Research Group instruments The ILL provides a framework in which Collaborating Research Groups (CRGs) can build and manage instruments on ILL beamlines to carry out their own research programmes. CRGs represent ... there is demand from the user community and the resources are available, the beamtime reserved for ILL can be made accessible to users ...

d a different interpretation based on non-equilibrium effects. It has been shown that the samples can take an extremely long time to equilibrate depending on the aggregation and settling kinetics. In the ... to create a trapped film. Work has also been carried out on the mechanisms by which bulk aggregates can interact with interfaces. Different ...

IN20 Pending polarization analysis insert 3 He filter vacuum sample chamber Characteristics FlatCone can be used either in the horizontal mode to collect data from the equatorial reciprocal plane or in the ... using FlatCone is the application vTAS which offers a FlatCone option. In the simulation mode one can modify all instrument parameters and ...

cold neutron imaging instrument with additional X-rays imaging capabilities. These two modalities can be operated simultaneously. The typical configurations allow neutron radiography and tomography with ... available by means of a double crystal monochromator as well as a velocity selector. Additional equipment can be installed along the beam to ...

cryomagnet, even when the detector is placed at the worse position of 60°. In conclusion, this magnet can be used up to the maximum field when the goniometer is dismounted. 158OXHV26 (15T) Stray Magnetic Field ... factor 5 but the horizontal force is multiplied by 2 at the same take-off. Below 105.7°, the magnet can be used up to the maximum field ...

pressures up to 30 kbar. Temperatures from 40 mK to 320 K, with single crystal, powder or liquid samples can be achieved depending on the cell. Clamped cells are loaded to the desired pressure in a press and ... transferred into the neutron beam (directly or inside a cryostat). The pressure transmitting medium can be a liquid such as "fluorinert" ...

helium when the temperature falls to lower than 800 to 1000°C (depending on the furnace type). Users can enable or not this mode remotely from the instrument controller software. See J. Neutron Research 21 ... to 3000 K). We have started building a prototype compatible with the use of polarised beams which can be installed in a few hours like a ...