Recherche

below that is widely used at research facilities. However, it can only provide 50 W of heating power (we use 50 Ω heater resistances) and can only store 40 calibration curves. The first problem is fixed ... settings and evaluate closed loop operation with your equipment. You can explore different parameters and you may find better values but that c ...

PID parameters can also easily be modified from the Settings menus according to the user wishes. Full remote control Computer control via RS-485 and Ethernet is available. All parameters can be read and set ... The output heating power is displayed with a horizontal bar graph in % and a number in mW. The user can changed the helium bath relative ...

s with expertise in cryogenics. What sort of problems can the Out of Hours Team deal with ? Here are a few examples of the sort of problems we can deal with: cold-valve blockage temperature controller ... the weekend ? We know that not all unexpected major problems happen during normal office hours or can wait until the next day. The Services for ...

the plug will expand, raising the pressure inside the sample well. In some circumstances, the insert can be ejected from the cryostat like a rocket We explain below the safe working practice for the insertion

the 30 gauss field contour. This distance can be determined from the system stray field plot. Items such as steel beams or pillars and concrete reinforcing can cause problems, in particular any non-symmetric ... and Fv+13 Fh < 1300. The effects of stray magnetic fields on system performance and the environment can often require complex finite ...

around the horizontal field axis illuminating a 10 mm diameter sample. The output scattering angles can extend to a cone ±11° around the horizontal axis. The magnet is be tilt-able by ±10° at field and to ... in-situ measurements, or the application of electric fields. For both the low T stages, an optional unit can be used to rotate the sample ...

in a Ø10mm sphere centered on the beam axis. The beam opening is Ø20mm. The standard sample stick can be inserted so that its extremity reaches the beam height. Type ILL VTI Tmin 1.5K Tmax 300K Instrument

e. 6.3 ml. A separator may be used when the amount of available sample is low (6 ml required). It can also be provided with inserts producing a flat sample (1 or 2 mm thicknesses). These inserts are made

e. 6.3 ml. A separator may be used when the amount of available sample is low (6 ml required). It can also be provided with inserts producing a flat sample (1 or 2 mm thicknesses). These inserts are made

e. 6.3 ml. A separator may be used when the amount of available sample is low (6 ml required). It can also be provided with inserts producing a flat sample (1 or 2 mm thicknesses). These inserts are made