Recherche

peaks consistent with long-ranged antiferromagnetic order with a periodicity of two structural unit cells. The magnetic structure is present throughout the measured temperature range. The results are in agreement

Synthesis and characterization by neutron diffraction of perovskite-related halide materials for solar cells Bosina J. - Commissioning of the qBounce-Ramsey-spectrometer and its application to test the neutron’s ... surfactant complexes - Full text (pdf - 97 Mi) Di Bari D. - Protein dynamics in crowded systems : Cell thermal stability and protein ...

solar cells Universidad Autónoma de Madrid J.A. Alonso M.T. Fernandez-Diaz Carmen ABIA SANZ 2019.09.01 2023.04.18 191_21 MAT Energy materials: Electrolytes and cathodes for solid oxide fuel cells Durham ... Kenny PADRON ALEMAN 2023.07.01 ESP-1-2023 B&H, NPP Biological response to neutron irradiation of cells for new approaches in Boron Neutron ...

for the cell body, there is very little coherent scattering. The maximum sample dimensions vary with cells and pressure ranges. Most cells fit into standard "Orange" cryostats. These pressure cells are available ... In these cells the pressure is continuously adjusted from 0 to Pmax while the sample is in the beam. The cell is linked via a flexible ...

AW 7049A-T6. This cell is generally used on IN16B but can be also used on other instruments with or without the electrodes and dedicated sample stick. A complete description of the cell is provided in the ... This cell is designed to simultaneously measure the dielectric properties of the sample. It is mostly made from the aluminium alloy 7049A-T6 ...

This cell is made from the aluminium alloy 7049A-T6 and provides a Ø12 x 42 mm3 sample volume, i.e. 4.7 ml. The pressure is generated using a hydraulic press with or without separator. The maximum pressure

This cell is made from TiZr alloy and provides a Ø12 x 44 mm3 sample volume, i.e. 5 ml. The pressure is generated using a hydraulic press with or without separator. The maximum pressure is 700 MPa, i.e

This cell is made from hardened CuBe and provides a Ø6 x 65 mm3 sample volume i.e. 1.8 ml. A separator may be used when the amount of available sample is low (1.3 ml required). The pressure is generated

This cell is made from TiZr alloy and provides a Ø6 x 62 mm3 sample volume, i.e. 1.75 ml. A separator may be used when the amount of available sample is low (1.3 ml required). The pressure is generated

This cell is made from the aluminium alloy 7049A-T6 and provides a Ø6 x 60 mm 3 sample volume, i.e. 1.85 ml. The pressure is generated using a hydraulic press with or without external separator. The maximum