from the Neutron Optics team have constructed very large spin filter cells covering the full section of the beam (6 x 20 cm2 at the cell position) and accepting pressures up to 3 bar. We have designed and ... second one, called Cryopol-II, is a new cryogen-free version able to host much larger spin filter cells. Both consist of a superconducting Nb ...
Recherche
Recherche de cell.
432 résultats ont été trouvés en 3 millisecondes.
Affiche les résultats de 111 à 120 sur 432.
Pages
Pertinence: 45%
Pages
superconducting Nb cylinder hosting a spin filter cell and in which we trap a homogeneous magnetic field. The neutron beam entering Cryopol-II is polarised by the cell. At the exit, a magnetic field is applied ... polarising efficiency of a cell is given by: Slow 3He Relaxation in Cryopol-II where M10 and M20 are the monitor values measured with ...
Pertinence: 43%
Pages
Reservations Cryopol-II Cryopol-II is a cryogen-free cryostat able to host a large neutron spin filter cell in the stray field of a cryomagnet. The first experiment was carried out on D20 in July 2008: measurement ... the graph, the relaxation time of the 3He polarisation was better than 100 hours in the 1.9 litre cell (alias TetraPack ) filled at ...
Pertinence: 39%
Pages
Laurent Thion <ecliptique.com> The compressor which fills up the cells with polarised 3 He ©2023 Laurent Thion <ecliptique.com> Two typical cells which, once filled with polarised 3 He by Tyrex-2, are used ... ©2019 Laurent Thion <ecliptique.com> Nicolas showing the cell for PASTIS3 (IN20) ©2019 Laurent Thion <ecliptique.com> The variety of ...
Pertinence: 49%
Pages
uses neutron tomography to seek clarity on the problematic areas where Lithium gets stuck inside cells. The objective is to develop high-performing batteries in the future. Lübcke's project receives support
Pertinence: 23%
Pages
urgh cells. There are cells loaded with Florinert for room-temperature experments and cells loaded with He gas for low-temperature experiments in a 4 K dedicated cryostat. A third VX-1 type cell was built ... polarised neutron experiments to be carried out up to 4 GPa (40 kbar). All cells are provided with TiZr gaskets. These high-pressure cells ...
Pertinence: 100%
Pages
energy locally (within a radius of a few μm, i.e. from the size of a cell to the size of a metastasis), thereby only destroying cells located nearby, e.g. to treat a cancer using targeted radionuclide therapy
Pertinence: 25%
Pages
gasket (°C) X 40265 Temperature of the bottom gasket (°C) X 40269 Temperature of the Paris-Edinburgh cell (°C) X 40289 Temperature setpoint of the top anvil (°C) X X 40515 Output power delivered to the heater
Pertinence: 100%
Pages
3 - 320 A5 - AG3 Ø49 Top loading 164ILCC180 2.6 - 320 A5 - AG3 Ø180 (PE cell) Bottom loading, for Paris-Edinburgh pressure cell 173ILCC250 2.6 - 320 A5 - AG3 Ø250 Prototype 234ILCC10 1.8 - 320 A5 - AG3 ... +120° Bragg access, for Cryopad-III 247ILCC180 1.8 - 320 A5 - AG3 Ø180 (PE cell) Bottom loading, for Paris-Edinburgh pressure cell 267ILCC10 1.8 ...
Pertinence: 31%
Pages
This device contains a cold cell and a hot cell and the sample is moved, pneumatically, between the cells. The device is mounted on a translation stage allowing either cell to be in the neutron beam. Multiple ... limits of solidifications for each. The maximum is obtained for FC87 at 23kbar. Clamp cells : High pressure clamp cells was made from ...
Pertinence: 34%
