Recherche

is much faster and reversible, one can reproduce it many times in a cyclic way, and the DAS works in stroboscopic mode. Today, up to 256 complete diagrams or slices can be recorded, with a minimum active

into diffracting position using an ILL box-shaped monochromator mount so that the wavelength choice can be matched to the user’s sample. The new very large banana PSD is of innovative design and works at ... range in omega than a conventional cradle, and easy installation of a compact 2-stage Displex which can cool below 20K. Installation of a ...

discrete distances) Attenuators choice between 3 slitted cadmium sheets of different transmissions that can be combined to achieve 7 attenuation factors f a : f a =8.53 (att 1), f a =26.40 (att 2), f a =68.47 ... spatial resolution. After some modifications of the detector electronics, the maximum possible countrate can be increased to about 300 ...

acquisitions can be made with the diffraction detector at the same time as scans are made in triple-axis mode. Sample Environment In the four-circle mode, the offset C-shaped Eulerian cradle can be equipped ... argon, or in vacuum) can be used with access to at least a quadrant of reciprocal space. In the two-axis mode, all standard ILL cryostats, ...

account for the vertical divergence in the scattered beam [4]. Spectroscopy : D7 has a Fermi chopper and can be operated as a time-of-flight spectrometer with permanent polarization analysis. It is trivial to ... more measurement time. Finally, the resolution of the instrument has been charcterized and details can be found in Ref. [5]. References: ...

drive and PST lower background through background chopper and vacuum housing secondary spectrometer can be operated alternatively without vacuum several Doppler velocity profiles (sine, constant velocity)

between the three different instruments can be done without difficulty in about two hours. Either the three-axis spectrometer (TAS) and IN1 Lagrange. Spectrometer can be connected to the instrument monochromator ... angles at the sample and the analyser can be changed in the intervals -115°<2θS<115° and -120°<2θA<120°. Three different analysers ...

target position. The FIPPS setup is designed to be modular so that additional equipment and detectors can be added to improve the sensitivity with respect to specific nuclear physics observables. The signals ... fission products at ILL. The GFM-spectrometer is now under development. It will be designed such that it can be transported to other ...

size w. sample changer for 4 samples, can take dilution insert down to 50 mK) Quartz window horizontal field cryomagnet < 8 T, 1.5 - 300 K (Maximum 20 mm sample size, can take dilution insert down to 50 mK)

a wide-angle thin aluminum exit window. The samples are usually contained in cylindrical vanadium cans. Vertical and horizontal slits allow defining a maximum illuminated cross-section of 5 cm (Vert) and ... furnaces (including aerodynamic levitation with laser heating). Counting statistics of 0.1% per 0.125º can be obtained in about 3 hours for a ...