Cryomagnet 258OXHV49
6T horizontal
Type | OINS VTI |
---|---|
Tmin | 1.6 K |
Tmax | 300 K |
Instrument | Pool |
Sensor Regul. | Cernox CX1050 |
---|---|
Serial number | X45374 |
Calibration | LK #510420 |
Interpol. Table | Download (LK336) (txt - 4.15 Ki) |
Sensor Samp. | Cernox CX1050 |
---|---|
Serial number | X45402 |
Calibration | LK #510508 |
Interpol. Table | Download (LK336) (txt - 4.10 Ki) |
This horizontal cryomagnet provides large symmetric 45° openings: 2 x 45° cones (parallel field axis) and 2 x 45° wedges (perp. field axis).
IPS-120 Test 07 superconducting magnet parameters (Test 06 magnet system configuration set to 1):
S01 | Amps/Tesla conversion | 94.93 A -> 6.7 T (but 6 T max field) |
---|---|---|
S02 | Power supply current limit | 94.93 A |
S03 | Lower (most negative) safe current | -150.0 A |
S04 | Upper (most positive) safe current | 149.99 A |
S05 | Current breakpoints for rate limiting | b01: 70 A |
S06 | Limiting rate for leads, magnet at zero | 240 A/min everywhere |
S07 | Limiting rate for leads, magnet at field | 240 A/min everywhere |
S08 | Limiting rate for magnet, "FASt" run | r01: 2.0 A/min between 0 and 70 A |
S09 | Limiting rate for magnet, "SLO " (slow) run | r01: 2.0 A/min between 0 and 70 A |
S10 | Software voltage limit | 10.00 V |
S11 | Magnet inductance | 111.8 Henry according to Oxford Instruments |
S15 | Switch heater current | 60 mA |