Close This Window

Please download official ILL logos here


For using on the web or on a screenFor printing in high resolutionWhite version, for dark backgrounds

Download PNG

Download AI

Download white PNG

Download JPG


Download white AI

Aerodynamic Levitation

Mark your calendar !

The International Society for Sample Environment (ISSE) will organise the second Sample Environment Technical School at NCNR on the 13-17th of November 2017.

Back to ILL Homepage
English French Deutsch 


Levitating samples in neutron beams

P. Martin, F. Marchal, N. Belkhier, A. Filhol, H. Fischer, M. Koza, J. Kozaily, E. Lelièvre-Berna
Institut Laue Langevin, 6 rue Jules Horowitz, 38042 Grenoble Cedex 9, France

L. Hennet
CNRS-CRMHT, 1d av. de la Recherche Scientifique, 45071 Orleans Cedex 2, France

Motivated by the results of recent experiments performed in a furnace exploiting the aerodynamic levitation technique, we have investigated the possibility to levitate samples well above nozzles. Indeed, with the present technique, only two thirds of the sample escape the nozzle and scatter neutrons. Even with a good collimation, one cannot prevent some neutrons to be scattered by the nozzle, leading to spurious signal in the detector.

When increasing the flow of gas exiting the nozzle, the force applied on the sample increases and pushes it out. The forces applied on the sample are maximum on the vertical axis of the nozzle and lower around the axis, leading to the immediate ejection of the sample. To circumvent that problem, we have decided to add a secondary jet parallel to the main one but directed in the opposite direction and off-centred by the size of the sample. This technique creates a twist at the sample position which may be set as high as several sample diame- ters above the bottom nozzle. This leads to an excellent stabilisation of the sample in the horizontal (scattering) plane. However, because of the non-laminar character of the jets, there remains some vertical oscillations which can be reduced with a third jet.

We present this technique and the results obtained with various gases, flow rates, sample sizes and densi- ties. We also summarise the attempts to levitate melted samples.