Cryomagnet 156OXHV49
6T vertical asymmetric - also known as 6T-CNRS
Type | ILL VTI |
---|---|
Tmin | 1.5K |
Tmax | 300K |
Instrument | Pool |
Sensor Regul. | Cernox CX1050 |
---|---|
Serial number | X42056 |
Calibration | ILL 2007-1 |
Interpol. Table | download (txt - 5.70 Ki) |
The sample stick #2 is used to apply an electric field (0 - 20 KV AC/DC).
Sensor Samp. | Cernox CX1050 |
---|---|
Serial number | X42057 |
Calibration | ILL 2007-1 |
Interpol. Table | download (txt - 5.70 Ki) |
Sensor Samp. #2 | Cernox CX1050 |
---|---|
Serial number | X144635 |
Calibration | ILL 2019-1 |
Interpol. Table | download (txt - 5.65 Ki) |
IPS-120 Test 07 superconducting magnet parameters (Test 06 magnet system configuration set to 1)
S01 | Amps/Tesla conversion | 101.6 A -> 6 T |
---|---|---|
S02 | Power supply current limit | 101.6 A |
S03 | Lower (most negative) safe current | -101.6 A |
S04 | Upper (most positive) safe current | 101.6 A |
S05 | Current breakpoints for rate limiting | b01: 60 A |
S06 | Limiting rate for leads, magnet at zero | 240 A/min everywhere |
S07 | Limiting rate for leads, magnet at field | 240 A/min everywhere |
S08 | Limiting rate for magnet, "FASt" run | r01: 5 A/min between 0 and 60 A |
S09 | Limiting rate for magnet, "SLO " (slow) run | r01: 5 A/min between 0 and 60 A |
S10 | Software voltage limit | 10 V |
S11 | Magnet inductance | 30.7 Henry according to ILL measurements |
S15 | Switch heater current | 100 mA |