balance Mettler Toledo AE 200 | room 205 | 
| 0 ...200 (0.1 mg) |
balance Mettler Toledo AE 163 | room 209 | 
| Dual range balance 0 ... 30 g (0.01 mg) and 0...160 g (0.1 mg) |
balance Mettler Toledo AE 240 | D11 lab | | Dual range balance 0 ... 40 g (0.01 mg) and 0...200 g (0.1 mg) |
balance Mettler Toledo PM 2000 | D11 lab | | 5 ... 2000 g (0.01g) |
balance Mettler Toledo AG 204 Delta Range | D22 lab | 
| Dual range balance 0 ... 61 g (0.1 mg) and 0...210 g (1 mg) |
centrifuge hellma | cleaning room | 
| Centrifuge for rectangular (10 mm width) Hellma cells |
centrifuge Eppendorf 5804 R | cleaning room |
| Temperature range -9 to 40oC rotor 6 x 85 ml, max speed 11 000 rpm rotor 30 x 1.5/2 ml, max speed 14 000 rpm |
densimetre PAAR DMA 58 | room 204 | 
| the apparatus determines density of liquid and gases by measuring period of oscillation. |
fumehoods | room 205 | 
|
|
furnace Carbolite CTF 12/65 | room 205 | 
| Max Temp. 1200 oC, ceramic work tube, length 600 mm, bore 65 mm Possibility to work under vacuum Never put directly your sample in the heating tube. Use a temperature- resistive sample holder! |
furnace Prolabo 0. 950.02 | room 205 | 
| Max Temp. 1100 oC |
furnace Carbolite STF 16/--/450 | room 207 | 
| max temp. 1500 oC, ceramic work tube, length 900 mm, bore 45 mm The ceramic work tube can be cracked if workpieces are inserted too quickly or at temperature below 900 oC when the tube is more brittle. Avoid large temperature difference between the tube and the sample. Do not set too high heating rate. Large diameter tubes are less resistant to thermal shock |
furnace Carbolite TZF 12/65/550 | room 207 | 
| Three heating zones , max temp. 1200 oC, ceramic work tube, length 600 mm, bore 65 mm The ceramic work tube can be cracked if workpieces are inserted too quickly or at temperature below 900 oC when the tube is more brittle. Avoid large temperature difference between the tube and the sample |
glove box BRAUN, UNILAB | room 207 | | ppm O2<1 ppm H2O< 1 dowload here a Short UserManual |
Langmuir- Blodgett trough Nima Technology | room 204 |
|
|
microscope | room 205 | |
|
brewster angle microscope Nanofilm | room 204 (to be installed on FIGARO) |
|
|
vacuum oven Bioblock | room 207 | | Max Temp. 200 oC, possibility to work under vacuum, time switch |
oven Memmert | room 207 | | Max Temp. 220 oC |
vacuum oven Heraeus VT5042 EK | D11 | | Max Temp. 250 oC, possibility to work under vacuum or N2 atmosphere, time switch |
rotovapor | room 204 | 
|
|
tensiometer Krüss K11 | room 204 |  | with thermostatted water bath; probe: ring or plate |
UV spectrometer | room 209 | 
|
|
high purity demineralizer water ELGA | room 205 | 
| high purity demineralizer water, 18 MOhm Fill the tank with demineralized water, no tap water |
high purity demineralizer water Millipore | D11 | 
| milli-RO installation delivering demineralized water for the milli-Q system (18 MOhm) |
demineralized water Millipore (soon available) | D22 | 
| milli-RO installation |
Legal notice